How to Prevent Longitudinal Deflection of Conveyor Belts Due to Friction

In industrial production, conveyor belt is an important transportation equipment, which is widely used in various material transmission processes. However, the conveyor belt may experience longitudinal deviation due to friction during operation, which can affect the normal operation of the conveyor belt and even lead to material loss, equipment damage and other problems. In order to solve these problems, we need to understand how to prevent the vertical deviation of the conveyor belt due to friction. This article will explore the methods to prevent the vertical deviation of the conveyor belt.

First, choose the right conveyor belt

Choosing the right conveyor belt is the key to preventing the conveyor belt from shifting vertically due to friction. When choosing a conveyor belt, factors such as its material, specification, and scope of application need to be considered. For example, a conveyor belt with a high coefficient of friction can be selected, which can increase the friction between the conveyor belt and the driving roller, thereby preventing the longitudinal deviation of the conveyor belt. In addition, it is also necessary to select the appropriate size and thickness of the conveyor belt according to the actual application scenario to ensure that it can withstand the required load and friction.

Second, increase the tension of the conveyor belt

Increasing the tension of the conveyor belt can increase the friction between the conveyor belt and the driving roller, thereby preventing the longitudinal deviation of the conveyor belt. When installing the conveyor belt, the tension of the conveyor belt can be increased by adjusting the tensioning device. It should be noted that the increase in tension needs to be moderate to avoid premature wear and rupture of the conveyor belt.

Third, keep the conveyor belt clean

Keeping the conveyor belt clean can reduce the influence of material residues on friction, thereby preventing the conveyor belt from shifting vertically due to friction. It is necessary to clean the residues on the surface of the conveyor belt regularly, especially for some viscous materials, special attention needs to be paid to cleaning. At the same time, it is also necessary to check whether the conveyor belt is damaged or worn, and repair and replace it in time.

IV. Regular inspection and maintenance

Regular inspection and maintenance is an important measure to prevent the vertical deviation of the conveyor belt due to friction. It is necessary to regularly check whether the tensioning device, driving roller and other key components of the conveyor belt are working properly, and adjust and repair them in time. At the same time, it is also necessary to check whether the conveyor belt is damaged or worn, and repair and replace it in time.

Control the quality and flow of materials

The quality and flow rate of the material are also one of the factors that affect the friction of the conveyor belt. If the material contains impurities or moisture, it will increase the friction between the conveyor belt and the driving drum, resulting in longitudinal deviation. Therefore, it is necessary to control the quality and flow rate of the material to ensure that it meets the requirements. At the same time, it is also necessary to reasonably control the flow and speed of the material to avoid excessive impact and friction on the conveyor belt.

To sum up, preventing the vertical deviation of the conveyor belt due to friction requires several aspects. Selecting the right conveyor belt, increasing the tension of the conveyor belt, keeping the conveyor belt clean, regular inspection and maintenance, and controlling the quality and flow of materials are all effective methods to prevent the vertical deviation of the conveyor belt. Through the implementation of these measures, the failure rate of the conveyor belt can be reduced, and the production efficiency and quality can be improved.