Sharing of maintenance and maintenance skills of conveyor belt correction device

Conveyor belt correction equipment plays an important role in industrial production, which can effectively correct the deviation of conveyor belts, improve production efficiency and product quality. However, in order to ensure the normal operation of the correction device and prolong its service life, regular maintenance and maintenance is essential. This article will share the maintenance and maintenance tips of conveyor belt correction equipment.

Routine maintenance

    Inspection: Conduct regular inspections of the correction device to check whether the correction device and its accessories have abnormal sound, heat, vibration or wear.

    Cleaning: Regularly remove dust and dirt from the surface of the correction device to keep the device clean. At the same time, check whether there is any damage or foreign matter on the surface of the conveyor belt and deal with it in time.

    Lubrication: According to the requirements of the equipment manual, regularly lubricate the bearings, chains, gears and other components of the correction device to reduce wear and friction.

Second, regular maintenance

    Chain adjustment: Regularly check the tension and tightness of the chain, adjust the length of the chain, and ensure the normal operation of the chain. Too tight or too loose chains can affect the performance and service life of the correction device.

    Bearing inspection: check whether the bearing is worn or loose, and replace the bearing or fasten the bearing seat in time if necessary.

    Electrical inspection: Check whether the electrical components of the deviation correction device are abnormal, such as sensors, switches, cables, etc. If there is any fault, repair or replace it in time.

    Test operation: Regularly test the deviation correction device to check whether the deviation correction device can work normally. At the same time, observe the operation of the conveyor belt to ensure that the conveyor belt and the deviation correction device cooperate well.

III. Precautions

    When performing maintenance and maintenance, it is necessary to cut off the power supply first to ensure that the equipment is in a safe condition.

    It is strictly forbidden to repair and maintain the equipment during operation to avoid accidents.

    During maintenance, the equipment should be operated according to the requirements of the equipment manual to avoid damage to the equipment due to improper operation.

    For the repair and replacement of key components, it is recommended that professional technicians complete it to ensure the normal operation and service life of the equipment.

To sum up, the maintenance and maintenance of the conveyor belt correction device needs to be carried out regularly, including daily maintenance, regular maintenance and the observance of precautions. Proper maintenance and maintenance can ensure the normal operation of the correction device, prolong its service life, reduce the failure rate, and thus provide protection for the enterprise to reduce production costs and improve economic benefits. Therefore, operators and technicians should pay full attention to the maintenance and maintenance of the conveyor belt correction device to ensure the stable operation of the equipment and the normal production of the enterprise.